Tune Up Kit For IH 464 464 544 574 674 2400A 2400B 2410B 2500A 3400A 3500A Fits

One New Aftermarket Tune Up Kit For IH 464 464 544 574 674 2400A 2400B 2410B 2500A 3400A 3500A Fits Delco

FITS:

IH / Fits International Harvester / Fits FARMALL

454, 464, 544, 574, 674

2400A, 2400B, 2405B, 2410B, 2412B, 2500A, 2500B, 2505B, 2510B, 2514B,

3400A, 3500A,

W/ SCREW STYLE Fits Delco DISTRIBUTOR

Fits Delco Distributor # 1112477, 1112489, 1112697

1954566, 1956007, 1962640, 19545587

KIT CONTAINS:

DISTRIBUTOR CAP – SCREW STYLE, IGNITION KIT (POINTS, CONDENSOR, ROTOR) SPARK PLUG WIRE SET & 4 SPARK PLUGS

Models This Part Fits:

100, 130, 140, 200, 230, 240, 2400A, 2400B, 2410B, 2500A, 300, 330, 340, 350, 464, 544, 574, 674, Super AAdditional Information: (1) 4 Cylinder Spark Plug Wiring Set -These will fit most 4 cylinder models. They have copper core wires with aluminum coating to prevent corrosion and 90 degree boots. -Note: You must cut the wires to length and crimp the ends with a crimping tool. -Wire lengths are approximately; (2) 24-3/4″ spark plug wires (1) 29-3/4″ spark plug wire (1) 34-1/2″ spark plug wire (1) 23-1/2″ long coil wire. -The coil wire is made from excess wire left over from the spark plug wire. (4) Spark Plugs Thread Size: 18mm Hex Size: 13/16″ (20.6mm) Reach: 12mm (.472″) Gap: .028″ (0.7mm) Heat Range: 2 Resistor: No Thread Pitch: 1.5mm (1) Distributor Cap For use on 4 cylinder Delco distributor with screw held cap (1963 and up) Replaces Part Number(s): 4058876, 74058876, R11257, 1024914M91, 10P3022, 30-3024016 (1) Ignition Tune-Up Kit Contains: Points, Rotor and Condenser Fits distributors with screw held cap Point Gaps vary by applications Replaces Part Number(s): 79001128, 79001168, 19545587, 1954566, 1956007, 1962640, AR12000, AR31814, AR4864, AT14468, AT14873, AT15929, ATK10DSR, R12260, 1024916M1, 839008M1, 839008M91, 10P3024, 10P3025, 156360A, 156365A, 156367A